Write your Feed Back
It is a 5V 8 Channel Relay Module. The relay normally open interface maximum load: AC 250V/10A, DC 30V/10A. It has a trigger current of 5mA, and module working voltage of DC 5V. Each channel of the module can be triggered by a jumper to set a high level or a low level. Fault-tolerant design, even if the control line is disconnected, the relay will not move. With status indicator: power (green), 6-channel relay status indicator (red). All module size interfaces can be directly connected through the terminal block, which is convenient and practical.
Specifications
| Operating Voltage (VDC) | 3 ~ 5 |
| Trigger Voltage (VDC) | 5 |
| Switching Voltage (VAC) | 250@10A |
| Switching Voltage (VDC) | 30@10A |
| Storage condition (℃) | – 65 to 125 |
| Operating Temperature (°C) | -40 to 85 |
| Length (mm) | 138 |
| Width (mm) | 43 |
| Height (mm) | 17 |
| Weight (gm) | 100 |
| Shipment Weight | 0.12 kg |
Features:
- The 8550 transistor drive, driveability.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
Package Includes:
- 1 x 5V 8 Channel Relay Module.
