Write your Feed Back
PTZ is an abbreviation for pan, tilt, and zoom and reflects the movement options of the camera, and a pan–tilt–zoom camera (PTZ camera) is a camera that is capable of remote directional and zoom control. A PTZ camera is not a still camera. Instead, it could move the camera and the lens, and that means a single camera can be used to monitor places that should be covered by multiple ones. You can save a lot of cost and time in purchasing and deploying the camera if a PTZ camera can handle the job. With its moveable lens, you will also be able to zoom the camera to see a specific area that you are interested in. To conclude, it’s “do more with less.”
Specification
| Sensor Model | IMX219 |
| Camera Driver | Native |
| Focus Type | Auto |
| IR Sensitivity | IR Cut Switch |
| Interface | MIPI |
| Resolution | 8 MP |
| Sensor Color | Color |
| Shutter Type | Rolling Shutter |
| Active Pixels | 3280 (H) × 2464 (V) |
| Image Sensor Format | Type 1/4″ |
| Pixel Size | 1.12μm×1.12μm |
| CSI-2 Data Output | 2-lane mode |
| Data Format | Raw Bayer 10bit |
| Length (mm) | 36 |
| Width (mm) | 36 |
| Height (mm) | 45 |
| Weight (gm) | 20 |
| Shipment Weight | 0.04 kg |
Features:
- Real PTZ with servos for directional control and varifocal lens for optical zoom now comes to the Raspberry Pi and Jetson Nano / Xavier NX
- Switchable IR Cut through software for your day/night vision
- Make full use of the CSI connector now that a single camera can be used to monitor places that should be covered by multiple ones
- Autofocus control, pan/tilt/zoom keyboard control supported in software
- 8MP IMX219 Camera board
- PTZ Controller Board Connector Part Number: S6B-XH-A-1
Package includes:
- 1pcs Arducam PTZ Pan Tilt Zoom Lens
- 1pcs Controller Board
- 1pcs 8MP Camera Board
- 1pcs 15-Pin FPC Cable (11.8 in/30 cm)
- 1pcs XH2.54 Jumper wire with 6Pin Famale Connector (11.8 in/30 cm)
