PTZ is an abbreviation for pan, tilt, and zoom and reflects the movement options of the camera, and a pan–tilt–zoom camera (PTZ camera) is a camera that is capable of remote directional and zoom control. A PTZ camera is not a still camera. Instead, it could move the camera and the lens, and that means a single camera can be used to monitor places that should be covered by multiple ones. You can save a lot of cost and time in purchasing and deploying the camera if a PTZ camera can handle the job. With its moveable lens, you will also be able to zoom the camera to see a specific area that you are interested in. To conclude, it’s “do more with less.
Note: Camera Board is not included in this kit
Specification
Camera Driver | Native |
Focus Type | Auto |
IR Sensitivity | IR Cut Switch |
Interface | MIPI |
Resolution | 5 MP |
Sensor Color | Color |
Shutter Type | Rolling Shutter |
Focal-Length | 3.2-11.1±5% |
TTL | 52.14±0.2 |
Image Circle | ∅6.9 |
Lens Structure | 6G3P |
FOV | 1/2.7”(16:9): H(113~30),V(60~16),D(137~34) |
1/3”(4:3): H(91~25),V(66~18),D(120~30) | |
1/4”(4:3): H(67~18),V(49~13),D(90~22) | |
M.O.D | 0.8m |
Focus | Front group: focus |
Back group: Zoom | |
Pan and Tilt Range | 0-180° |
PWM Control Signal Frequency | 50HZ |
Auto Focus Time | 4s to 20s |
Zoom Range (Wide => Tele) | 2317 steps 0.00396mm/step |
Focus Range(Near => Far) | 3009 steps 0.0047mm/step |
Length (mm) | 36 |
Width (mm) | 36 |
Height (mm) | 45 |
Weight (gm) | 20 |
Shipment Weight | 0.05 kg |
Features:
- Real PTZ with servos for directional control and varifocal lens for optical zoom now comes to the Raspberry Pi and Jetson Nano / Xavier NX
- Switchable IR Cut through software for your day/night vision
- Make full use of the CSI connector now that a single camera can be used to monitor places that should be covered by multiple ones
- Autofocus control, pan/tilt/zoom keyboard control supported in software
- 8MP IMX219 Camera board
Package Includes:
- 1 x Arducam PTZ Pan Tilt Zoom Camera Controller for Raspberry Pi 4/3B+/3