The 50kg Half-bridge Experiments Body Scale Load Cell Sensor is measuring; the correct force is applied to the outer side of the strain E-shaped beam portion of the sensor (i.e., a strain gauge affixed to the intermediate, adhesive coating with white beam arms); and the outer edges to form a shear force in the opposite direction, i.e., middle strain beam bending necessary changes can occur under stress, strain beam side by another force should not be a barrier.
Specifications
Capacity (Kg) | 50 |
Output Sensitivity (mv/v) | 1 ± 0.1 |
Nonlinearity (%FS) | 0.03 |
Repeatability (%FS) | 0.03 |
Input Resistance (Ω) | 1000 |
Insulation Resistance (MΩ) | 5000 |
Length (mm) | 34 |
Width (mm) | 34 |
Height (mm) | 8 |
Weight (gm) | 20 |
Cable Length (cm) | 30 |
Shipment Weight | 0.022 kg |
Features :
- Internal 1000Ohm half-bridge strain gauge load cell, the range is 50kg, half-bridge structure.
- Widely used in hopper scales, platform scales, platform balance, belt scales, and other electronic weighing devices.
- This is a half-bridge load sensor, which is widely used in weight scales. When the half-bridge is being stretched, it sends the signal via the red signal wire.
- Alloy Steel wired weighing load cell, high accuracy, simple structure, simple installation.
- You can use multiple load sensors simultaneously to increase the capacity range, Parallel use to add additional capacity.
Package Includes:
- 1 x 50kg Half-bridge Experiments Body Scale Load Cell Sensor.