Write your Feed Back
This is a Cytron 10Amp 7V-30V DC Motor Driver for R/C (2 Channels) MDDRC10. If you are Building an RC vehicle or mobile robot without any microcontroller then MDDRC10 is what you need. It’s plug-and-play and can be connected directly to the RC receiver. No coding or programming is needed. Selectable mixed-mode allows the differential drive motors to be controlled from a throttle (forward-reverse) and a steering channel. Onboard switching regulator which produces 5V output is also available to power the RC receiver. This eliminates the need for an extra battery eliminator circuit (BEC).
Specifications
| Operating Voltage (VDC) | 7 V ~ 30 V |
| Max. Motor Current | 10 A continuous, 30 A peak |
| Motor Output PWM Frequency | 20 kHz |
| RC Input Voltage (RC1 & RC2) | Low Level: 0-0.7 V |
| High Level: 1.5-15 V | |
| Output Maximum Current | 0-500 mA |
| Length (mm) | 89 |
| Width (mm) | 48.3 |
| Height (mm) | 5 |
| Mounting Hole Diameter (mm) | M3 |
| Weight (gm) | 30 |
Features:
- Plug & play, controlled from RC directly.
- Auto calibration upon power-up.
- Selectable mixed or independent input mode.
- Bidirectional control for two brushed DC motors.
- Onboard 5V switching regulator to power the RC receiver (500mA max).
- Buttons for quick testing.
- LEDs for motor output state.
- 20kHz motor output PWM frequency.
- Overcurrent protection with active current limiting.
- Temperature protection.
- Undervoltage shutdown.
Package Includes:
- 1 x 10Amp 7V-30V DC Motor Driver for R/C (2 Channels)
- 2 x 2561 3-way connector extension wire
- 4 x PCB Spacer
