Write your Feed Back
The Cytron Driver HAT-MDD10 is the latest motor driver designed for Raspberry Pi, the HAT-MDD10 is designed to drive two high current brushed DC motor up to 10A continuously by using Raspberry Pi as the controller.
It offers signed-magnitude PWM control of direction and speed. Besides, using full solid state components which result in a faster response time and eliminate the wear and tear of the mechanical relay.
Specifications
| Driver Model | Cytron MDD10-HAT |
| Operating Voltage (VDC) | 6 ~ 24 |
| Peak Current (A) | 12:00 AM |
| Continuous Current (A) | Jan-00 |
| No. of Channels | 2 |
| Operating Modes | PWM (Lock-Antiphase and Sign-Magnitude): Yes, UART: No, Analog:No, RC Servo Signal: No |
| Battery Protection Mode | No |
| Over-Current Protection (A) | Yes |
| Thermal Protection | Yes |
| LED Indicator | Yes |
| Test/Manual Button | Yes |
| Cooling Fan | No |
| Arduino Sheild | No- can be used with Wire connection |
Features :
- Bi-directional control for two brushed DC motor.
- Support motor voltage ranges from 6VDC to 24VDC.
- Onboard the test button for manual control of the motor.
- Every channel output built with LED indicator.
- Maximum current up to 10A continuous (without a heatsink at 25℃) and 30A peak (10 seconds).
- Current limiting at 30A.
- Raspberry Pi compatible connector.
- Solid state components provide faster response time.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
- Speed control PWM frequency up to 20KHz (Actual output frequency is the same as the input frequency from Raspberry Pi).
- Support sign-magnitude PWM operation.
- Support TTL PWM from the microcontroller, not PWM from RC receiver.
Package Includes :
- 1 x Cytron Driver HAT-MDD10
