ESP32-S3-DevKitC-1-N16R8 Type C ESP32-S3 Development Board Wi-Fi + BLE MCU Module Integrates Flash: 16MB QD PSRAM: 8MB Complete Wi-Fi and BLE Functions for Arduino

Connectivity Speed: 2.4 GHZ Flash: 16MB QD PSRAM: 8MB QD SPI Voltage: 3.3V Module Integrated:  Description: You must possess hardware. 1. ESP32-S3-DevKitC-1. 2. Standard A to Micro-B USB 2 point 0 cable. 3. a computer running Windows, Linux, or macOS. power source of your choice. default power supply (recommended), USB-to-UART port, and ESP32-S3 USB port (either one or both). GND and 2.5V pin headers. Pin headers for GND and 3.3V3. With the ESP32-S3-WROOM-1 general-purpose Wi-Fi + BT LE MCU module with full Wi-Fi,. It has Bluetooth LE functionality, which speeds up signal processing and neural network workloads. also includes a PCB antenna. using the serial port to run firmware. When the board is powered on, the LED will turn on at 5 volts. RGB LED: GPIO 8-driven, addressable RGB LED. One USB-UART bridge chip offers transfer rates of 3 Mbps. LDO: Low Dropout Voltage Regulator, 5V to 3.3V. Button’s specifics are as follows.