MPU9250 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module features the MPU-9250, which is a multi-chip module (MCM) consisting of two dies integrated into a single QFN package. One die houses the 3-Axis gyroscope and the 3-Axis accelerometer. The other die houses the AK8963 3-Axis magnetometer. Hence, the MPU-9250 is a 9-axis Motion Tracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer, and a Digital Motion Processor (DMP). It is based on I2C Address, Address: 0x68 by default, 0x69 if AD0 is pulled high.
Specifications
Power Supply | 4.4 to 6.5 V or 3.3V (if you solder the solder jumper near the on-board voltage regulator) |
Gyro Range | ± 250 500 1000 2000 ° / s |
Acceleration Range | ± 2 ± 4 ± 8 ± 16g |
Magnetic Field Range | ± 4800uT |
Degree of Freedom (DOF) | 900% |
Interface | I2C |
Length (mm) | 26 |
Width (mm) | 15 |
Height (mm) | 3 |
Weight (gm) | 2 |
Shipment Weight | 0.005 kg |
Features :
- Acceleration, Gyroscope, and Magnetometer
- 9 DOF module
- Build-in ultra-low noise linear LDO voltage regulator.
- Built-in onboard filters, which reduce noise from the motor and other high current electronics.
- All sensors connected to the I2C bus.
- Build-in the Logic level converter for I2C.
- Power indicator LED.
- Using Immersion Gold PCB, machine welding process to ensure quality.
- On-board pull-up resistors on SDA, SCL, and nCS
- On-board pull-down resistors on FSYNC and AD0
Package Includes :
- 1 x GY-9255 MPU9255 Sensor Module
- 1 x Jumper Header(Unsoldered).