Write your Feed Back
The L9110S dual-channel h-bridge motor driver module is a compact board that can be used to drive small robots. This module is based on the L9110 Motor Driver IC. This module has two independent motor driver chips which can each drive up to 800mA of continuous current. The boards can be operated from 2.5 V to 12 V enabling this module to be used with both 3.3 Volts and 5 Volts microcontrollers. A set of female header pins is used to connect this module to a microcontroller. The motors are attached via two sets of screw terminals.
Specifications
| Power supply voltage | DC 2.5-12V |
| Working temperature | 0-80 °C |
| Operating current | 0.8A |
| Length(mm) | 29.2 |
| Width(mm) | 23 |
| Height(mm) | 15 |
| Weight(g) | 7 |
| Shipment Weight | 0.01 kg |
Features:
- Low static work current
- Power supply voltage: DC2.5-12V
- Each channel has 800mA continuous current output
- Low saturation pressure drop
- TTL/CMOS output level compatible can be connected directly to the CPU
- Output built-in clamping diode, apply to the perceptual load
- Control and drive integrated into IC
- Have pin high-pressure protection function
- Working temperature: 0-80 °C
Package Includes:
- 1 x L9110 DC Stepper Motor Driver Board HBridge
