Write your Feed Back
Lichee Nano is an SD Card Sized Linux Development Board Powered by Allwinner F1C100s ARM9 Processor. Litchi Pie Nano opens your geek heart This is an exquisite small board measuring only 2.54cm X 3.3cm, which is equivalent to the size of an SD card.
The Board supports:
- CSI Camera
- Full HD Video Engine (H.264, H.263, JPEG / MJPEG, etc.)
- RGB LCD Interface
- CVBS Input / Output
- Audio Codec
- I2S / PCM
- SD / eMMc
This is thanks to the main chip of Litchi Pie Nano-Quanzhi F1C100s; Arm9 architecture, 16KB D-cache, 32KB I-Cache, support boot from SPI Flash or TF card, and support USB OTG loading update.
Litchi Pie Nano continues the clever design of the previous generation, 2.54mm common pin welding holes + 1.27mm stamp hole patch design, which is convenient for you to DIY while supporting patch production and making more complex applications.
In addition, since the first generation of the Litchi Pie, it has been constantly adapting to peripherals and has mature modules that have been extensively verified by TF-Wifi, RGB to VGA, 40 pin RGB, LCD, RGB to GPIO, Camera, etc.
Litchi Pie Nano is now officially supported by RT-Thread. You can apply RT-Thread’s rich ecological resources to quickly and efficiently prototype design.
Litchi Pie Nano continues the clever design of the previous generation, 2.54mm common pin welding holes + 1.27mm stamp hole patch design, which is convenient for you to DIY while supporting patch production and making more complex applications.
In addition, since the first generation of the Litchi Pie, it has been constantly adapting to peripherals and has mature modules that have been extensively verified by TF-Wifi, RGB to VGA, 40 pin RGB, LCD, RGB to GPIO, Camera, etc.Litchi Pie Nano is now officially supported by RT-Thread. You can apply RT-Thread’s rich ecological resources to quickly and efficiently prototype design.
Specifications:
| CPU | Allwinner F1C100s, ARM 926EJS processor,up to 900MHz |
| Memory | 32MB DDR integrated into SoC |
| SPI Flash | 16MB |
| Communication Interface | SDIO for WiFi module |
| SPI x2, TWI x3, UART x3 | |
| OTG USB x1, TV-out | |
| Other Interface | PWM x2 |
| LRADC x1 | |
| Headphone output x2 | |
| Mic x1 | |
| Input Voltage(V) | 5V via micro USB port |
| 3.3 to 5V via pin | |
| Output Voltage(V) | 3.3 |
| Power Consumption | 54mA (idle) with Linux, 250mA with display |
| Storage Temperature(°C) | -40 ~ 125 |
| Operating Temperature(°C) | -20 to 70 |
| Length(mm) | 25.4 |
| Width(mm) | 33 |
| Weight(g) | 4.2 |
