Write your Feed Back
SkyRC D260 is a dual-channel AC/DC charger, which features an intuitive interface, and its button design makes it incredibly easy to operate. With two independent circuits and the ability to charge batteries up to 6S at a maximum of 14A per channel, D260 is a smart choice for RC hobbyists.
Multi-purpose for Most Battery Chemistries
The juice box comes with the charging algorithm for the most common battery chemistries: LiPo, Li-Ion, LiHV, LiFe, NiMH, NiCD, and Pb (lead-acid).
Dual Output
D260 allows you to charge two different battery packs simultaneously with 130W rated power per channel. The maximum charge current can be 14 amperes.
Intuitive Operation
The five-button panel and the brightly backlit LCD screen making charging a breeze even for beginners. D260 inherits from other chargers by SkyRC; many users will find it very familiar and easy to get started. Even if D260 is your first programmable charger, you’ll find it easy to learn. Users just scroll through parameters, use up/down keys to adjust values, then click a key to enter.
LiHV Mode Available
The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35V.
Versatile with the Addition of AGM & Cold Modes
AGM (Absorbent Glass Mat) battery is maintenance-free, provides excellent electrical reliability, and is lighter than the flooded lead-acid type. However, AGM batteries are far more different than normal lead-acid batteries. Although both of them have the same essential components, they have different chemical structures that make them a lot different from each other. Never take the risk of charging AGM batteries with a regular charger in the normal Pb mode.
Smart & Efficient Cooling System
Temperature controlled high-speed sleeve bearing cooling fan effectively blows the air through the extruded aluminum heat sink, effectively cooling the device.
DC Power Supply
With just a few clicks, D260 can be turned into a power supply unit to power your hobby equipment. Two channels can be used individually to power two different hobby gadgets simultaneously.
Universal Voltage Input
With the universal-voltage input circuit, you don’t need hassle finding a voltage converter between 110V and 220V while traveling around! Even in the field, with the built-in DC input between 11V-18V, racers power the charger with their DIY battery packs.
PC Software for Data Analysis and Firmware Upgrade
ChargeMaster can start/stop the charging process, and view real-time graphs of current, voltage, capacity, and monitor single-cell voltage.
Specifications
| Input Voltage (V AC) | 110 ~ 240 |
| DC Input Voltage Range (V) | 11 ~ 18 |
| Output Power(Watt) | 2 x 130W |
| Charge Current Range (A) | (0.1 ~ 14) X 2 |
| Maximum Discharge Power (W) | 10 x 2 |
| Dischage Current Range (A) | (0.1 ~2.0) x 2 |
| Drain Current for Balancing Li-Po’s (mA/Cell) | 500 |
| Li-ion/Po cell count | 1 ~ 6 |
| NiCd/NiMH cell count | 1 ~ 15 Cells |
| Pb battery voltage | 2 ~ 20 |
| Length (mm) | 160 |
| Width (mm) | 150 |
| Height (mm) | 71 |
| Weight (gm) | 896 |
| Shipment Weight | 1.2 kg |
Features:
- Supports up to 6S Lithium Batteries
- Terminal Voltage Control
- Re-Peak Mode for NiMH/NiCd Battery
- Battery Voltage Meter
- Battery Internal Resistance Meter
- Power Supply Output 260W/5-25V
- USB Port for PC Communication snd Firmware Upgrade
- Can Charge Two Different Batteries on Two Different Channels
Package Includes:
- 1 x SKYRC D260 Charger (Original)
- 1 x User Manual
- 1 x Power Cord (1.2m)
- 2 x XT60 Female to Banana Cable
