Features :
1 | Part number | 1M1-M000127DVB |
2 | Processor | Dual-Core ARM Cortex-A9 |
3 | Memory | 512MB DDR3 / 128Mbit FLASH |
4 | Storage | Micro SD card slot |
5 | Video | : HDMI In / HDMI Out |
6 | Audio | HP+Mic, Line in, ADAU1761 AUDIO codec |
7 | Network | 10/100/1000 Ethernet |
8 | Expansion | USB Host connected to ARM PS |
9 | Interfaces GPIO | Arduino Shield connector, Raspberry Pi connector, 2 Pmod ports |
10 | Other I/O | 6 User LEDs, 4 Push-buttons, 2 Slide Switches |
Specifications:
- 650MHz dual-core Cortex-A9 processor
- DDR3 memory controller with 8 DMA channels and 4 High Performance AXI3 Slave ports
- High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO
- Low-bandwidth peripheral controller: SPI, UART, CAN, I2C
- Programmable from JTAG, Quad-SPI flash, and microSD card
- Programmable logic equivalent to Artix-7 FPGA
- 13,300 logic slices, each with four 6-input LUTs and 8 flip-flops
- 630 KB of fast block RAM
- 4 clock management tiles, each with a phase-locked loop (PLL) and mixed-mode clock manager (MMCM)
- 220 DSP slices
- On-chip analog-to-digital converter (XADC)
Memory
- 512MB DDR3 with 16-bit bus @ 1050Mbps
- 16MB Quad-SPI Flash with factory programmed 48- bit globally unique EUI-48/64™ compatible identifier
- microSD slot
Power
- Powered from USB or 7V-15V external power source USB and Ethernet
- Gigabit Ethernet PHY
- Micro USB-JTAG Programming circuitry
- Micro USB-UART bridge
- USB 2.0 OTG PHY (supports host only)
Audio and Video
- HDMI sink port (input)
- HDMI source port (output)
- I2S interface with 24bit DAC with 3.5mm TRRS jack
- Line-in with 3.5mm jack Switches, Push-buttons and LEDs
- 4 push-buttons
- 2 slide switches
- 4 LEDs
- 2 RGB LEDs
Expansion Connectors
- Two standard Pmod ports
- 16 Total FPGA I/O (8 shared pins with Raspberry Pi connector)
- Arduino Shield connector
- 24 Total FPGA I/O
- 6 Single-ended 0-3.3V Analog inputs to XADC
- Raspberry Pi connector
In Package
- PYNQ-Z2 board
- 8GB micro SD card
- AC/DC adapter
- USB Type-A to micro USB cable
- Ethernet cable