Write your Feed Back
This environment sensors module gives Raspberry Pi the ability to collect environment data like temperature & humidity, air pressure, ambient light intensity, VOC, IR ray, UV ray, etc. It can also be used to build a robot that can detect motion and orientation
Specifications
| TSL25911FN DIGITAL AMBIENT LIGHT SENSOR | I2C address: 0x29 |
| Effective: range0~88000Lux | |
| BME280 TEMPERATURE, HUMIDITY, AND AIR PRESSURE SENSOR | I2C address: 0x76 |
| Temperature detection: -40 ~ 85℃ (0.01℃ resolution, ±1℃ accuracy) | |
| Humidity detection: 0~100%RH (0.008%RH resolution, ±3%RH accuracy, 1s response time, ≤2%RH delay) | |
| Air pressure detection: 300~1100hPa (0.18Pa resolution, ±1hPa accuracy) | |
| ICM20948 MOTION SENSOR (9-DOF: 3-AXIS ACCELEROMETER, 3-AXIS GYROSCROPE, 3-AXIS MAGNETOMETER) | I2C address: 0x68 |
| Accelerometer resolution: 16-bit | |
| Accelerometer range (configurable): ±2, ±4, ±8, ±16g | |
| Gyroscope resolution: 16-bit | |
| Gyroscope range (configurable): ±250, ±500, ±1000, ±2000°/sec | |
| Magnetometer range: ±4900µT | |
| Magnetometer resolution: 16-bit | |
| LTR390-UV-1 UV SENSOR | I2C address: 0x53 |
| Response wavelength: 280nm – 430nm | |
| SGP40 VOC SENSOR | I2C address: 0x59 |
| Measuring range: 0 ~ 1,000 ppm ethanol equivalent | |
| Limit condition: < 0.05 ppm ethanol equivalent OR < 10 % preset concentration point (the larger one should prevail) | |
| Response time: < 10 s (tau 63 %) | |
| Start time: < 60 s | |
| Shipment Weight | 0.017 kg |
Features:
- 40PIN GPIO, Compatible with all the Raspberry Pi Boards.
- Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
- Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
- Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer
- Onboard LTR390-UV-1 sensor, for measuring UV rays
- Onboard SGP40 sensor, for detecting ambient VOC
- Onboard 1.3inch OLED display, for displaying environment data in real-time
- I2C bus allows reading and displaying data by just using two wires
- Comes with development resources and user manual (python examples)
Package Includes:
- 1 x Environment Sensor HAT
- 1 x 2x20PIN female header
- 1 x 4PIN header
- 1 x RPi screws pack (2pcs)
