Write your Feed Back
JLink is a JTAG simulator support the simulation of arm core chip. Cooperate with IAR EWAR,ADS,KEIL,WINARM,RealView and other integrated development environments to support all ARM7/ARM9/ARM11,Cortex M0/M1/M3/M4, the simulation of core chips such as CortexA5/A8/A9 is seamlessly connected with compilation environments such as IAR and Keil, which is convenient to operate, easy to connect and easy to learn, it is the best and most practical development tool for learning and developing ARM.
SUPPORT
- USB 2.0 Full Speed
- JTAG interface
- SWD interface
- SWO interface
- SPI interface
- Microchip ICSP interface
- Renesas FINE interface
- SiLabs C2 2-wire interface
- ETB Trace ARM7/9
- ETB Trace Cortex-M
- ETB Trace Cortex-A/R
- VCOM
- Memory Stop mode support
- ARM 7,9,11
- CORTEX ARM A5,A7,A8,A9,A12
- CORTEX M0,M0+,M1,M3,M4,M7,M23,M33,R4,R5,
- SC000,SC300
- PIC32MX
- PIC32MZ
- EFM8
- RX110,RX111,RX210,RX21A,RX220,RX610,RX621,RX62G,RX62G,RX62N,RX62T,RX630,RX631,RX63N,
- RX63T,RX64M
Features :
1. The main control chip adopts STM32F205, the firmware is not lost, and the hardware is upgraded to the latest version of V9.4
2. Can provide 3.3V and 0.8A current for the development board (pin 2)
3. Support standard JTAG interface and 2-wire SWD debugging interface. The speed can reach 20M (JTAG) / 15M (SWD) per second.
4. Support debugging of all ARM chips, support MDK or IAR, and compile environment IDE supported by other standard JLink.
5.Fully automatic firmware upgrade
Package includes :
1 x J link V9 Debugger
1 x USB Cable
1 x Connector Cable
Jashbindar singh (verified owner) –
Good Product, Fast Delivery