Write your Feed Back
The nRF52 DK is a single-board development kit (DK) forBluetooth Low Energy, Bluetooth mesh, ANT and 2.4 GHz proprietary applications using the nRF52810 and nRF52832 SoCs.
It facilitates development exploiting all features of the nRF52810and the nRF52832 SoCs. It includes an NFC antenna thatquickly enables utilization of the NFC-A tag peripheral on thenRF52832. The kit gives access to all I/Os and interfaces via edge connectors and has 4 LEDs and 4 buttons which are userprogrammable
It comes with an on-board SEGGER J-Link debugger allowingprogramming and debugging both the on-board SoC andexternal SoCs through the debug out header.
Key features
Affordable, rapid prototyping and development
solution for the nRF52810 and nRF52832 SoCs
Supports Bluetooth LE, Bluetooth mesh, ANT and 2.4 GHz
proprietary development
Bluetooth 5 feature support: 2 Mbps, Advertising Extensions
and Channel Selection Algoritm #2 (CSA #2)
Arm® Cortex™ M4 with floating point support
DSP instruction set
Arduino Uno Rev. 3 compatible for use with 3rd party shields
All I/Os and interfaces are available via connectors
Segger J-Link OB programming/debugging supported
Support for programming/debugging of external boards
Integrated 2.4 GHz PCB antenna
NFC antenna
Connector for external NFC antenna
Connector for RF measurements
Pins for power consumption measurements
Coin-cell battery holder
1.7-3.6 V supplied from battery, USB or external
Datasheet : click here
Package includes :
- nRF52 DK board,
- NFC antenna
- CR2032 battery
Reviews
There are no reviews yet.