TP4056 Micro USB 1A Li-Ion Battery Charging Board with Current Protection
Specifications:
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
- Input interface: micro USB.
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Led indicator: red is charging Green is fully charged.
- Inversed polarity: NO.
- Dimension: 25 x 19 x 10 (LxWxH)mm.
NOTE:
- Ampere meter can only be connected to a 5v input end of the module.
- It is better than the charging current is 37% of the battery capacity. If you charge the battery of 1000mAh, a current of 400mAh is enough.
- The connection wire should not be too thick.
- Make sure the connect point is good.
- If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-subtract the charging current to avoid burn damage to the chip.
- NO Reverse polarity.
VAKEEL AHMAD –
Best
Sushil kumar –
Working excellence thank you “compoindia”
GAGANDEEP SINGH (verified owner) –